Frequently asked questions · Nanaimo electrician

Electrical questions, answered straight

The questions Nanaimo homeowners ask us most — permits, panels, breakers, EV chargers, and what jobs cost. Short answers, no jargon. If yours isn't here, call or send it through the quote form and we'll answer it.

Quotes, cost & booking

Do you give free quotes?▾

Yes. Tell us about the job through the quote form, by phone, or by email — photos help. Straightforward jobs can often be quoted from photos and a short conversation. Larger work gets a site visit and a written quote before anything starts, so you know the price before we touch a wire. A site visit to look, diagnose, or measure is billed at our visit minimum, and credited in full against the invoice if the work goes ahead.

How much does a panel upgrade cost?▾

It depends on the service size, where the panel sits, whether there's a disconnect ahead of it, and whether BC Hydro has to disconnect and reconnect the service. That's why we quote from photos and a site visit rather than a flat number. Send a photo of your panel and tell us what you're adding — a ballpark by phone or email is free, and a written quote follows before any work starts.

How long does a panel swap take?▾

Most panel swaps are done in a day. Your power is off only while the swap itself is happening. If there's no disconnect ahead of the panel, BC Hydro has to disconnect and reconnect the service, which we schedule as part of the job — that adds coordination, not days.

How quickly can you come out?▾

For urgent faults — sparking, smoking, or a burning smell — same-day call-out on working days. For routine work we book a visit that suits you. We reply to quote requests within one business day, usually much faster. Hours are Monday–Friday, 9 AM–5 PM.

Permits, code & safety

Do I need a permit for electrical work?▾

In BC, service and panel work and most new circuits require an electrical permit through Technical Safety BC, and the work has to be inspected. We handle the permit and the inspection as part of the job, so it's never left to you. In some cases a homeowner can take out a permit for their own home, but the work still has to meet the Canadian Electrical Code and pass inspection. Not sure about your job? Use the permit checker to check it.

Something's sparking or smells like burning — what do I do?▾

Turn the circuit off at the breaker if it's safe to do so, don't use the outlet or fixture, and call us right away at 250-327-2223. If there's fire or immediate danger, call 911 first.

Why does my breaker keep tripping?▾

A breaker trips because something's wrong on the circuit: too much load, a short circuit, a ground fault, or a failing breaker. Unplug what you can, reset it once, and if it trips again, leave it off and call an electrician — repeatedly resetting a breaker that keeps tripping can hide a real fault. If it's a GFCI or AFCI breaker tripping, the cause is usually moisture, a damaged cord, or an appliance fault, and it's worth finding before it gets worse.

What are AFCI and GFCI breakers, and does my older home need them?▾

A GFCI protects people from shock — it trips in a fraction of a second if current leaks where it shouldn't, which is why it's required in kitchens, bathrooms, and outdoors. An AFCI protects against arc faults, the sparking in damaged wiring that can start fires, and it's required for most receptacle circuits in new work. Homes built before those rules applied are exempt — nobody has to retrofit. But adding the protection is one of the cheapest safety upgrades there is, and it's required whenever that circuit is rewired or extended.

Panels, service & big loads

Is my Federal Pioneer (Stab-Lok) panel dangerous?▾

Not automatically — but it's the panel insurers ask about most. In Canada there is one formal safety alert, covering specific 15-amp Stab-Lok breakers made in 1996–97 that may not trip. Technical Safety BC does not require replacement based on the brand alone. Insurers are a different story: many flag Stab-Lok at renewal or when a home sells. Use the panel brand lookup to see where your panel stands, or send us a photo of the door label.

Do I need to upgrade from 60 amps to 100 amps?▾

In most cases, yes. Sixty-amp service is below the minimum most Canadian insurers accept — many require an upgrade to at least 100 amps or apply a surcharge — and a 60-amp service with fuses is flagged by almost every insurer. A 100-amp service meets the usual minimum and suits most homes. The load calculator shows whether your service has room for what you're adding.

Can my panel handle an EV charger, a heat pump, or a hot tub?▾

It depends on the service size and what's already on it — not on how many spare breaker spaces you see. The check is a load calculation, and you can run one yourself with the dwelling load calculator. If the numbers are close, your BC Hydro meter data can show room the standard calculation doesn't. And a load-management device can let an EV charger run safely on a service that couldn't otherwise carry it — ask us before assuming you need an upgrade. For hot tubs specifically, the hot tub hookup lookup gives the breaker, wire, and GFCI requirements.

My panel is full — do I need a bigger service?▾

Not necessarily. A full panel is a spaces problem, and a service that's too small is a capacity problem — they're different. Sometimes a subpanel, or breaker types the panel is rated for, buys the spaces you need without touching the service. Other times the service genuinely is too small for the load. An assessment — and a load calculation — tells you which one you have before you spend anything.

About us

Are you licensed and insured?▾

Yes. Harbour Electrical Services Ltd. is a licensed electrical contractor — Technical Safety BC licence LEL0102076 — and the work is done by a Class B Field Safety Representative. We're insured, and we take out the permits and arrange the inspections as part of every job that needs them.

What areas do you serve?▾

We're based in Nanaimo, at 6257 Shoreline Drive, with regular work in Nanaimo, Lantzville, Nanoose Bay, Parksville, Qualicum Beach, Cedar, Ladysmith, and Gabriola Island. For commercial and job-site work we also travel to Duncan, Chemainus, Port Alberni, and up-Island to Courtenay and Comox — just ask.

Do you do temporary power for construction sites?▾

Yes. We install, test and remove temporary services — generator connections, distribution, cabling, disconnects and grounding for trailers and site facilities — and provide hourly rates for changes and service calls.

Please read this before relying on these answers

These answers give general guidance only, based on the Canadian Electrical Code as adopted in BC, published regulator positions, and insurer guidance available in November 2026. They are not a substitute for an inspection of your installation, your insurer's requirements, or advice from a licensed electrical contractor who has seen your installation.

Rules and insurer requirements change over time, and information here may contain errors or be out of date. Harbour Electrical Services Ltd. isn't liable for decisions made from these answers. If anything is unclear, get it assessed properly — that's a free conversation, not a commitment.

Still have a question?

Ask it straight — call, email, or send it through the quote form with a photo if you have one. We reply within one business day, usually much faster.