Free lookup · For BC homeowners

Is my electrical panel a problem?

Pick the brand on your panel door and get a plain answer — what insurers ask about it, whether replacement parts are still made, and what to do. The list starts with the brands seen most often in local homes, and includes the older models.

No law in BC forces a panel out because of its brand alone. What usually forces the issue is your insurer, or a buyer's inspection when you sell. This lookup tells you where your panel stands on both.

Your panel

Open the panel door — don't remove the cover — and read the label on the inside of the door. The breakers are marked too: "Stab-Lok" on the handles means Federal Pioneer; push buttons mean Pushmatic.
Service size matters to insurers whatever the brand — 60-amp service is below what most Canadian insurers accept.

Thinking about an EV charger, heat pump or hot tub? The brand is only half the question — the other half is whether the service has room. Check it with the load calculator.

Selling soon? Older panels are one of the most common inspection flags. Walk the pre-listing checklist before listing day.

What it means

Insurance—
Parts—
What to do—
Service size—

An assessment settles it properly — age, condition, spare spaces, and what your insurer actually requires. That's a free conversation, not a commitment.

More free tools: all our calculators and useful links in one place.

How to find your panel brand

  1. Open the door, not the cover. The brand, model and maximum amps are on the label stuck to the inside of the panel door. Never remove the screwed-on cover — live parts sit behind it.
  2. Read the breakers. Breaker handles carry the brand too: "Stab-Lok" means Federal Pioneer; "QO" means Square D; "BR" means Eaton/Bryant; a white enclosure with white breakers means Leviton. Push buttons instead of switches mean Bulldog Pushmatic.
  3. Fuses instead of switches? Then it's a fuse panel, whatever the brand — pick "Fuse box / fuse panel" above.
  4. No single main breaker? Some older panels are split-bus: several large breakers act together as the disconnect. That isn't a brand, but tell us if yours looks like that — it affects the swap.
  5. Still stuck? Take a photo of the door label and the breakers and send it to us — we'll identify it.

Buying a replacement breaker? Most current residential brands — and their breakers — are sold at Home Depot and electrical wholesalers. Breakers are not interchangeable between brands: match the brand and type exactly, and bring the old breaker or a photo with you. If your panel is an older or discontinued brand, call first — not every rating is still made.

What actually decides it

Regulators and insurers use different rulebooks. Technical Safety BC has said it does not require replacement based on the brand alone — an existing panel keeps its standing as long as it is in good condition. Insurers ask different questions: breakers or fuses, service amperage, and age. Their requirements vary from one company to the next, so the specific question goes to your insurer.

Age, condition and capacity decide most cases. A panel 30–40+ years old, with no spare spaces, rust, heat marks, or a service too small for what the house needs, is a candidate for replacement whatever the name on the door. A sale usually forces the question: the buyer's inspector and the buyer's insurer both look at the panel.

Warning signs — don't wait on these

If you see any of these, call an electrician rather than waiting for a renewal letter.

Quick reference — all brands

BrandVerdictIn one line
Schneider ElectricUsually fineCurrent line; parent of Square D, Homeline, Federal Pioneer.
Square D (QO)Usually fineCurrent line; no brand-based insurer issue.
HomelineUsually fineCurrent Schneider value line; no brand-based insurer issue.
SiemensUsually fineCurrent line; no brand-based insurer issue.
Cutler-HammerUsually fineCurrent Eaton line; no brand-based insurer issue.
EatonUsually fineCurrent line; no brand-based insurer issue.
LevitonUsually fineCurrent line, CSA certified; no brand-based insurer issue.
GEUsually fineCurrent line; no brand-based insurer issue.
WestinghouseWorth a closer lookDiscontinued; now in the Eaton family.
Federal Pioneer (Stab-Lok)Worth a closer lookMost common older panel in BC; many insurers flag it.
CommanderWorth a closer lookCanadian, discontinued; age and parts are the issue.
CEBWorth a closer lookSame family as Commander; fuse versions are the bigger concern.
SylvaniaWorth a closer lookSame family; some share the Zinsco design.
ZinscoWorth a closer lookDocumented bus-bar failures; plan on replacing it.
ChallengerWorth a closer lookDiscontinued; some share the Zinsco design.
Bulldog / PushmaticWorth a closer lookVery old; obsolete, parts scarce.
ITEWorth a closer lookOlder line, later Siemens; age and parts vary.
BryantWorth a closer lookOlder line, now Eaton BR; age and condition decide.
Fuse box (any brand)Likely a problem for insuranceInsurers want breakers and at least 100 amps.

Please read this before relying on the result

This lookup gives general guidance only, based on published regulator positions, insurer guidance, and industry references available in November 2026. It is not a substitute for your insurer's requirements, an inspection of your panel, or advice from a licensed electrical contractor who has seen your installation.

Insurer requirements vary from one company to the next and change over time. Information here may contain errors or be out of date. Harbour Electrical Services Ltd. isn't liable for decisions made from these results. If anything is unclear, check with your insurer and get the panel assessed properly — that's a free conversation, not a commitment.

Not sure about your panel?

Tell us the brand — or send a photo of the door label — and we'll tell you straight where it stands: what your insurer is likely to ask, whether parts are still made, and what a swap takes if you need one. No obligation.