Free printable · No sign-up

Label your panel in 20 minutes

When a breaker trips at night, the label is what stands between you and a dark house. Fill in what each breaker feeds, print the directory, and stick it inside the panel door.

Your entries save on this device as you type, so you can fill it in over a couple of sessions. The amps column takes the number printed on the breaker handle. The Phase column alternates A, B down the schedule, and each number has two lines — one on phase A, one on phase B — just like the sticker inside a panel door.

More free tools: all our calculators and useful links in one place.

How to fill it in

  1. Work with a helper if you can — one person at the panel, one checking rooms.
  2. Turn off one breaker at a time. Note what loses power, turn it back on, write it down.
  3. Check the number on the breaker handle and put it in the Amps column — 15, 20, 30, 40, 50.
  4. Be specific. "Kitchen plugs, east wall" beats "kitchen." Future-you will thank present-you.
  5. Note the big ones. Range, dryer, water heater, EV charger, hot tub — the 240 V circuits use both lines of a number, phase A and phase B.
  6. Print, trim, and tape it inside the panel door. Update it whenever a circuit changes.

Please read this before you start

Labeling only needs the breaker handles — never remove the panel cover. If a breaker is damaged, hot, buzzing, scorched, or won't reset, leave it off and call an electrician. This directory is a labeling aid, not an inspection: figures and guidance may contain errors.

Panel a mystery? We'll map it for you.

If half your breakers are unlabeled — or labeled "misc" — we'll trace every circuit, label the panel properly, and check for the things inspectors flag. Nanaimo and area, one visit.